Becker Map Pilot Operating Manual page 23

Notes:
• If two words need to be entered you
must enter them by selecting the un-
derscore character (_).
• By pressing and holding the rotary
control/push button, you can always
select the first item in the list that ap-
pears at the bottom.
When sufficient letters have been selected
it will automatically switch to a list from
which you can select the street. You can
also jump down to the list beforehand by
pressing the % button. You can then
select the street from the list.
Selecting a city
Note:
If you want to enter street first:
> Press the & button.
> Select .
Street first
The destination city can be specified by
entering the name or postal code.
When you select the letters of a city, the
Becker® MAP PILOT displays sugges-
tions. If you do not wish to accept the sug-
gestion simply select the subsequent let-
ters of the desired city.
The Becker® MAP PILOT excludes all
impossible letter combinations and postal
codes and activates only those letters and
numbers that could give the name of an
existing city or postal code.
> Select the letters of the destination city
or the numbers of the postal code con-
secutively.
NAVIGATION MODE
Notes:
• If two words need to be entered you
must enter them by selecting the un-
derscore character (_).
• By pressing and holding the rotary
control/push button, you can always
select the first item in the list that ap-
pears at the bottom.
When sufficient letters have been entered
it will automatically switch to a list from
which you can select the city. You can also
jump down to the list beforehand by
pressing the % button. You can then
select the city from the list.
>>>
> EN
22