Using The Input Menu; Entering Characters - Becker Map Pilot Operating Manual

>>> GENERAL OPERATION
The navigation satellites currently availa-
ble are shown in the bottom right corner.
> EN
If route guidance is already active, the cur-
rent destination address is displayed in the
bottom line.
By pressing the %
the rotary control/push button, the route
guidance is cancelled.
Route guidance can also be interrupted by
pressing button
13

Using the input menu

Some applications require input using the
input menu.
The characters input using the input
menu are displayed in the top line of text.
The middle section is used for character
button followed by
entry. The bottom section can display a
list of all cities corresponding to the letters
entered so far when entering a city, for ex-
ample.
in the main menu.
C
Note:
The input menus that are not used for
destination input are locked when your
vehicle is travelling at a speed in excess of
5 km/h. If you are currently in such an
input menu, a message indicating that
the menu has been locked will be dis-
played. The menus are enabled again
when the speed falls below 3 km/h.

Entering characters

Characters are input by selecting them
with the rotary control/push button.
When a navigation destination is entered,
the Becker® MAP PILOT compares the
data with the stored data.
Only those letters that are still possible are
available for selection.
Note:
By pressing and holding the rotary
control/push button, you can always
select the first item in the list that appears
at the bottom.
If you have selected enough letters, a list
automatically appears. Select the desired
entry from the list using the rotary con-
trol/push button.