Selecting A Destination From The Map; Coordinate Entry - Becker Map Pilot Operating Manual

Selecting a destination from the
map
You can select a destination straight from
the map.
> Select
from the destina-
Select on map
tion input menu.
The map display appears.
> Search for the desired position.
Note:
Turn the rotary control/push button to
change the scale of the map display.
With the buttons ( , $
% , you can move the crosshairs dis-
played to the desired position.
> Press the rotary control/push button.
Depending on the position of the cross-
hair pointer, a list of potential destina-
tions, an address or geocoordinates is dis-
played. When TMC message symbol
appears in the cross-hair pointer, it is also
displayed in the list. By selecting it in the
list, you can pull up the message details.
> Select the desired entry from the list.
Note:
Press the &
options.
, & ,
> Select
Start guidance
guidance to the destination straight
away.

Coordinate entry

You can also enter your destination using
geographical coordinates.
> Select
> Select
> From the numbers indicated by
Notes:
button for more control
By selecting
gree to decimal input and vice versa.
to begin route
> Select
> Enter the geographical longitude as de-
NAVIGATION MODE
Enter geo-coordinates
destination input menu.
1 3
2
to set the direction required
1
for the geographic latitude.
lect the required numbers.
you can switch from de-
3
.
scribed earlier.
>>>
> EN
from the
se-
2
28