Set Route Options; Display Entire Route - Becker Map Pilot Operating Manual

>>> NAVIGATION MODE
Nearby/all POIs
> Select .
> EN
More...
> Select
Search POI on route
or
> Select
Search POI near destination
> Select the desired category.
> Then select the desired POI.
> Start navigation to the selected POI.
39

Set route options

You can adjust route options (route
selection etc.) during the destination
navigation.
> In the route menu, select
.
options
> Configure
described under "Route options" on
page 45.
.
After any modification, the route will be
recalculated.
.
Route
the route options as

Display Entire route

You can view the entire route to the
destination on the map. You can also see
the entire route description and block
specific route sections/roads permanently.
As an additional option, you can also view
the various routes that can be selected in
Route options and select one if desired.
> In the route menu, select
Show route
The entire route is displayed.
In the left area, you can see the remaining
section and the expected trip time. The
destination address is displayed in the
lower area.
Select in order to continue with
Resume
the destination navigation.
.