Table of Contents
Advertisement
Map toolbox
Using the map toolbox you can change
the settings for route guidance, for the
map display mode and for the route.
> In the map display, press the MINI joy-
stick.
With an active route guidance, the follow-
ing version of the toolbox is displayed.
If there is no active route guidance, the
following version of the toolbox is dis-
played.
With
you can select the
Enter destination
destination input. With no active route
guidance, the entries
Route
are not available.
Route
Note:
The following functions are only availa-
ble when route guidance is active.
> Select
Route
The route menu appears.
Entering/deleting a stopover
With this function, you can enter a stopo-
ver or delete an entered stopover.
> In the route menu, select
.
stopover
You can now enter a destination as a stop-
over as described in "Destination input"
on page 19. You also have the option of
selecting a destination in the last destina-
tions using
Select from last destinations
Once you have entered the desired stopo-
ver, the route is recalculated.
and
Repeat
in the map toolbox.
Add
.
NAVIGATION MODE
The entered stopover is marked on the
map as a green flag.
Deleting a stopover
> In the route menu, select
.
stopover
The stopover is deleted. The system per-
forms a route recalculation.
TMC on the route
You can view and edit TMC messages lo-
cated on your route.
Note:
The TMC messages that have led to a
change in the route are also displayed.
> In the Route menu, select
.
route
>>>
> ZH
> EN
Delete
TMC on
35
Advertisement
Table of Contents
