Using The Map Display; Map Toolbox; Use; Map Zooming - Becker MAP PILOT Instructions For Use Manual

Using the map display

Map zooming

If the Autozoom function is enabled as de-
scribed under "Map display" on page 43
or "Autozoom" on page 48, the map is en-
larged or reduced according to these set-
tings.
However, you can also enlarge or reduce
the map at any time during route guid-
ance by turning the rotary control/push
button. The Autozoom function is then
disabled until the next maneuver is
reached or for the duration of 60 seconds.
In the bottom right corner of the map, the
current map scale and compass is dis-
played.

Map toolbox

Using the map toolbox you can change
the settings for route guidance, for the
map display mode and for the route.
> In the map display, press the rotary con-
trol/push button.
The map toolbox is displayed.
NAVIGATION MODE

Route guidance

Note:
The following functions are only avail-
able when route guidance is active.
> Select
in the map toolbox.
Guidance
The route guidance menu appears.

Canceling route guidance

You can cancel active route guidance.
> In the route guidance menu, select
.
guidance
This cancels route guidance to all destina-
tions.
Note:
You can also cancel route guidance as de-
scribed in "Main menu" on page 13.
>>>
> USE
> FR
> ES
Stop
38