Starting The Content Manager - Becker Map Pilot Operating Manual

Note:
If installation does
automatically, start the Setup.exe file in
the "Content Manager" directory on the
removable storage medium.
> Follow the instructions of the software.
The Content Manager Becker® MAP
PILOT can be started immediately after
installation.
This completes the installation procedure.

Starting the Content Manager

> Connect the USB interface of the
Becker® MAP PILOT directly to the
USB port of the computer using the
USB cable provided.
After a short time, the Becker® MAP
PILOT is displayed as a removable storage
medium on the computer.
> Click on >
Start All Programs
computer.
> Select .
Content Manager
> Click on
Content Manager
The Content Manager Becker® MAP
PILOT is started.
not start
on the
.
GENERAL OPERATION >>>
> EN
16