Creating A New Route - Becker Map Pilot Operating Manual

Note:
You can also select a stage in the route
here. The route is then started from this
stage.
> Select the start point or your current
position as the start point for route
guidance.
Note:
When a start point is selected, this is only
used for the purposes of displaying a
route.
The individual stages are calculated.
A map of the stages will then be displayed.
The total distance and estimated total
journey time are displayed on the left-
hand side.
> Select
to start route guidance or
Start
select one of the functions described be-
low.
•
Route list
Displays a list of the individual stages.
•
Options
Calls up further options. You can then
simulate the route, optimise the route
(order of the destinations to be travelled
to) and call up the route options.
• and
Scrolls through the individual stages in
the route.
NAVIGATION MODE

Creating a new route

> Select from the route
Create new route
menu.
You can now enter a stage destination as
described under "Destination input" on
page 20. You also have the option of se-
lecting a destination in the last destina-
tions using
Select from last destinations
> Select to enter further stage
Add stage
destinations as described above.
> When you have entered all stage desti-
nations, select
Save route
route a name.
>>>
> EN
.
. Assign the
30