Entering A Poi Directly; Entering A Poi Directly By Phone Number - Becker Map Pilot Operating Manual

>>> NAVIGATION MODE
Note:
> EN
If you have already entered an address,
this address will appear by default.
> Press the
Select category
Note:
You can also select
menu will then open and you can enter
the name of a point of interest directly
and confirm it.
The points of interest categories available
for the entered city are displayed.
> Select the desired point of interest as de-
scribed under "POI nearby/POI near
destination" on page 26.
27

Entering a POI directly

> In the POI menu, select
name
button.
. An input
Select POI
> Enter the desired point of interest or
part of the name.
> To confirm the previous input, select
trol/push button.
The Becker® MAP PILOT displays in a
list all the points of interest corresponding
to the name entered.
Note:
The search radius is limited to 200 km
(125 mi.) around your current position.
A maximum of 50 points of interest are
displayed.
> Select the desired destination from the
list.
> Select
guidance to the point of interest straight
away.
POI search by
.
or press and hold the rotary con-
to begin route
Start guidance

Entering a POI directly by phone number

> In the POI menu, select
POI search by
.
phone number
> Enter the phone number (or a part of it)
of the desired point of interest.
When sufficient numbers have been se-
lected the Becker® MAP PILOT will au-
tomatically switch to a list from which you
can select the point of interest. However,
you can switch to the list before this by
pushing the rotary control/push button
downwards. You can then select the point
of interest from the list.
Note:
The search radius is limited to 200 km
(125 mi.) around your current position.
> Select the desired destination from the
list.
> Select
to begin route
Start guidance
guidance to the point of interest straight
away.