Manual Recalculation; The Map Display - Becker Map Pilot Operating Manual

>>> NAVIGATION MODE

Manual recalculation

If a traffic announcement affects your
> EN
route, a window with detailed informa-
tion on the traffic announcement appears.
By selecting
Detour
whether or not the message is to be taken
into account in the route calculation.
Note:
A detour is not generally calculated when
you select
Detour
when it is feasible in terms of time savings
and the route to be driven.
You can change your chosen setting at any
time in the message list.
If Becker® MAP PILOT determines that
a sensible detour is possible after you have
selected
Detour
appears.
33
you can specify
The display gives you an overview of the
calculated detour.
The route highlighted in red – and purple
if there is a traffic problem – shows the
. This is only done
previous route. The route highlighted in
green shows the calculated detour.
The remaining distance and the estimated
journey time for the previous route and
the detour are displayed at the top of the
display.
> Select the desired route.
, the following display

The map display

The map display is used primarily for
route guidance. However, you can also use
the map display without route guidance to
show your current position and, for exam-
ple, to receive warnings about exceeding
the speed limit.
Note:
The map display can show signs (e.g.
speed limits). Please note that this is ad-
ditional information in the map data.
The reality may differ from those signs.
The traffic situation and the local road
signs take precedence over the navigation
system information.