Editing A Route; Traffic Announcements; Displaying Tmc Messages - Becker Map Pilot Operating Manual

>>> NAVIGATION MODE

Editing a route

> Select the route you wish to edit.
> EN
> Highlight the stage that you wish to ed-
it.
> Press the &
The edit menu will be displayed. The fol-
lowing options are available:
Option
Start
guidance
Show details
/
Move up
Move down
Replace
stage
Delete stage
31

Traffic announcements

using TMC
Your Becker® MAP PILOT can receive
button.
traffic announcements (TMC messages)
from radio stations.
Traffic announcements are transmitted by
radio stations via the TMC (Traffic Mes-
Meaning
sage Channel) in addition to the radio
Start route guidance
programme and are received and analysed
from the selected stage.
by the navigation system. Receiving traffic
The data relating to the
announcements is free of charge.
stage destination is dis-
played.
The stage is moved for-
wards/backwards by one
position.
You can replace the se-
lected stage with another
The Becker® MAP PILOT constantly
stage destination.
checks whether there are any relevant an-
The stage is deleted from
nouncements for the route that has been
the route.
set.
If the continuous checks determine that a
traffic announcement is relevant to route
guidance, the unit can automatically re-
calculate a new route to the destination
(See "TMC settings" on page 49.).
Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot as-
sume responsibility for the completeness
or accuracy of the announcements.

Displaying TMC messages

Once you have connected the Becker®
MAP PILOT to the unit holder, your
Becker® MAP PILOT will receive up-to-
date traffic announcements and dynamic
route calculation will be enabled (traffic
jam diversion). You can also view traffic
announcements directly.
Settings for TMC can be made as de-
scribed under "TMC settings" on
page 49.
> Select
from the main menu.
TMC
The message list appears.