Becker Map Pilot Operating Manual page 25

After a short time, the alternative routes
will be displayed.
The area on the right-hand side shows the
colour key for the individual routes, the
mileage for each route and the estimated
driving time.
> Select the desired route.
The desired route is calculated and the
route guidance will begin.
Showing the destination on the map
> Press the & button in the Enter
Destination menu.
> Select .
On map
The map display is opened and the desti-
nation is displayed.
Storing a destination
> Press the
& button in the Enter
Destination menu.
> Select .
Save
> Enter the desired name.
> To confirm the entered name, select ei-
ther or press and hold the rotary
control/push button.
The destination is transferred to the last
destinations and protected.
NAVIGATION MODE
Starting route guidance
> In the address input menu, select
to start route guidance.
guidance
All data entered so far will be processed
during route calculation.
Note:
The icons above the address indicate any
filters you may have activated (e. g.
unpaved roads, toll roads).
If no navigation is active yet and the
function for alternate route selection is
switched on, See "Route options" on
page 45. you can have alternate routes
calculated in the next menu.
>>>
> EN
Start
24