Skip Destination; Display Destination List - Becker Map Pilot Operating Manual

>>> NAVIGATION MODE
> By turning the rotary control/push
button you can select the starting point
> EN
of the block.
> Press the rotary control/push button to
confirm the starting point.
> By turning the rotary control/push
button you can now select the end point
of the block.
> Press the rotary control/push button to
confirm the end point.
> Select
to activate the block.
Yes
The block is activated and the new route
is calculated.
41
Delete section block
You can remove a previously entered
block.
> In the route menu, select
.
blockings
The block is deleted and the new route is
calculated.

Skip destination

If a planned route with
destinations is active, you can delete the
current route destination. The destination
navigation to the next destination starts.
This may be necessary when a destination
was not approached directly. Otherwise,
the Becker® MAP PILOT will try to
direct you to the current destination.
> In the route menu, select
.
destination
The destination navigation to the next
destination starts.

Display destination list

If a planned
destinations is active, you can view and
modify the planned route.
Clear
> In the route menu, select
A map with the stages of the route is
displayed.
several
In the left area, the total number of miles/
kilometres and the expected trip time is
displayed.
> Select
Resume
Next
destination navigation or select one of
the following described functions. You
will see a detailed description of
individual functions under "Route
planning" on page 29.
route with several
.
Itinerary
to continue with the