Selecting A Destination From The Map; Coordinate Entry - Becker MAP PILOT Operating Manual

Selecting a destination from the
map
You can select a destination straight from
the map.
> Select
from the destina-
Select on map
tion input menu.
The map display appears.
> Search for the desired position.
Note:
Turn the rotary control/push button to
change the scale of the map display.
Push the rotary control/push button to
move the displayed cursor to the desired
position.
> Press the rotary control/push button.
A list of possible destinations, an address
or geographical coordinates are then dis-
played according to the position of the
cursor.
Note:
Push the rotary control/push button to
the right for further control options.
> Select
to begin route
Start guidance
guidance to the destination straight
away.

Coordinate entry

You can also enter your destination using
geographical coordinates.
> Select
Enter geo-coordinates
destination input menu.
1 3
2
NAVIGATION MODE
> Select
to set the direction required
1
for the geographic latitude.
> From the numbers indicated by
lect the required numbers.
Notes:
By selecting
3
gree to decimal input and vice versa.
> Select .
> Enter the geographical longitude as de-
scribed earlier.
Where possible, an address matching the
coordinates will be displayed.
Note:
Push the rotary control/push button to
the right for further control options.
from the
> Select
Start guidance
guidance to the destination straight
away.
se-
2
you can switch from de-
to begin route
27
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS