Destination: Selecting From The Map - Becker Highspeed II Operating Instructions Manual

Destination: selecting from the map

If the destination required cannot yet
or can no longer be found in the destina-
tions memory, the Select on map button
allows you to select it directly.
No address details are asked for in this
case.
6004
Press the Select on map key to make a
!
direct selection.
The map display appears.
Note:
You may have to use the zoom keys to
increase the area displayed to find the
street required.
6009
Gently press the screen surface until
!
a circle of dots is drawn around the
destination requested. The destination
is recorded.
Information on the point selected
is loaded from the set of data and dis-
played. There are buttons under the in-
formation box which can be used to call
up several functions which are provided
for the route point selected.
The following function keys are provi-
ded for non-active directions to the des-
tination:
Key Meaning
Navigation Starts navigation
Add Adds the destination to
the route
Save Allows your destination
to be given a name
via the entry menu and
saves this in the destina-
tions memory
Search nearby Entry menu as for normal
POI entries
Navigational mode
When directions to the destination is ac-
tive, the Interim destination button
is also still available. You can use this
button to add the destination selected
from the map to your route as a part-way
destination.
6012
Press a key to undertake the action re-
!
quested.
44