SOLTEK SL-75ERV User Manual page 38

75ERV
6 Select "Install VIA ATAPI
Vendor Support Driver"
checkbox, then click the "Next"
button to continue.
8 Select "Install VIA AGP VxD"
in turbo mode and press
"Next" button to continue.
10 After all these setup procedures have finished, you should restart your
computer by clicking on "Finish" so as to put VIA 4in1 drivers into
effect and proceed to second driver installation.
Next
Next
Should restart system
Finish
38
7 Click on "Click to enable DMA
Mode" checkbox to enable DMA
function, then click the "Next"
button to continue.
9 Select "Install VIA IRQ Routing
Miniport Driver" checkbox, then
click the "Next" button to continue.
Next
Next