SOLTEK SL-75ERV User Manual page 69

ACPI Function Select Enabled only if your computer's operating
ACPI Suspend Type This item allows you to select the ACPI suspend
Power Management
Option
Maximum power savings. Only Available for SL
Max Saving
CPUs. Inactivity period is 1 minute in each mode.
Set each mode individually. Select time-out period
User Define
in the section for each mode stated below.
Minimum power savings. Inactivity period is 1 hour
Min Saving
in each mode (except the hard drive).
HDD Power Down When enabled and after the set time of system
Suspend Mode After the selected period of system inactivity, the
Video Off Option When enabled, this feature allows the VGA adapter
system supports the Advanced Configuration and
Power Interface (ACPI) specification. Currently,
Windows NT 5.0 support ACPI.
type. You can select S3(STR) for suspending to
DRAM or S1(POS) for power on suspend under
Windows 98 ACPI mode.
The choice: S1(POS), S3(STR).
This option allows you to select the type (or degree)
of power saving for Doze, Standby, and Suspend
modes.
This table describes each power management
mode:
inactivity, the hard disk drive will be powered down
while all other devices remain active.
chipset enters a hardware suspend mode, stopping
the CPU clock and possibly causing other system
devices to enter power management modes.
to operate in a power saving mode.
69
Chapter 4 BIOS Setup