SOLTEK SL-75ERV User Manual page 66

75ERV
* UR2 Duplex Mode This item allows you to select the IR half / full
* Onboard Parallel Port This item allows you to determine onboard parallel
* Parallel Mode Select an operating mode for the on-board parallel
* ECP Mode Use DMA Select a DMA channel for the port.
* Game Port Address This item allows you to select the onboard game
* Midi Port Address This item allows you to select the onboard Midi port
* Midi Port IRQ This item allows you to select the Midi port IRQ.
Init Display First Initialize the AGP video display before initializing any
OnChip USB Control-
duplex function.
The choices: Half; Full.
port controller I/O address setting.
The choices: 378H/IRQ7; 278H/IRQ5; 3BC/IRQ7;
Disabled.
(printer) port. Select Normal, Compatible, or SPP
unless you are certain your hardware and software
both support one of the other available modes.
port I/O address.
I/O address.
other display device on the system. Thus the AGP
display becomes the primary display.
Select Enabled if your system contains a Universal
ler Serial Bus (USB) controller and you have USB
peripherals.
66