SOLTEK SL-75ERV User Manual page 46

75ERV
Step 4. Type awdflash *.bin /sn/py/cc and then press <Enter> to run BIOS
upgrade program. (*.bin depends on your mainboard model and
version code. Instead of typing "*", you should type specific file name
for your specific mainboard).
Step 5. Please press <F1> or <F10> to exit or reset your system, Warning !
If the message "Write Fail" appears while Award "FLASH
MEMORY WRITER" is verifying Flash memory, just repeat the
process. Please DO NOT reset or turn off the system. If the award
memory flash utility is not able to update the BIOS successfully,
your system may not be able to boot up.
Step 6. You will need a message "CMOS checksum error-Default loaded"
during booting the system. Press <Del> to run CMOS setup utility,
then reload "LOAD SETUP DEFAULTS" or "Load Optimized De
faults" and save this change.
46