SOLTEK SL-75ERV User Manual page 65

VIA SuperIO Device
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Game Port Address
Midi Port Address
Midi Port IRQ
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
* Onboard FDC
Controller
* Onboard Serial
Port 1 / Port 2
* UART Mode Select The second serial port on your system may offer
VIA SuperIO Device
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
SPP
3
Disabled
Disabled
10
Select Enabled if your system has a floppy drive
controller (FDC) installing in the system board and
you want to use it. If you install add-in FDC or the
system has no floppy drive, select Disabled in this
field.
The choices: Enabled; Disabled.
Select a logical COM port name and matching
address for the first and second serial ports.
Select an address and corresponding interrupt
for the first and second serial ports.
a variety of infrared port modes. Click here for a
description of various modes. (Click your
browser 's Back button, or your right mouse
button, to return to this page.)
The choices: Standard; HPSIR; ASKIR
65
Chapter 4 BIOS Setup
Item Help
Menu Level