Via Onchip Ide Device - SOLTEK SL-75ERV User Manual

VIA OnChip IDE Device

CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
* On-Chip IDE channel
* IDE Prefetch Mode The on-board IDE drive supports IDE perfecting for
* Primary
Master / Slave PIO
Secondary
Master / Slave PIO
VIA OnChip IDE Device
The chipset contains a PCI IDE interface with
0/1 support from two IDE channels. Select Enabled
to activate the first and/or the second IDE
interface. Select Disabled to inactivate an inter-
face if you install a primary and/or second add-
on IDE interface.
The choices: Enabled; Disabled.
faster drive accesses. If the IDE device doesn't sup-
port perfecting, set this field to Disabled.
The choices: Enabled; Disabled.
Choose Auto or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose
Auto. You need to set to a lower mode than Auto
when your hard disk becomes unstable.
The choices: Auto; Mode 0; Mode 1; Mode 2; Mode
3; Mode 4.
63
Chapter 4 BIOS Setup
Enabled
Enabled Menu Level
Enabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Item Help