Slide Rail Assembly Notes For The Express Rail Rackmounting Kit - Fujitsu SPARC Enterprise T5140 Installation Manual

Slide Rail Assembly Notes for the
Express Rail Rackmounting Kit
The express rail rackmounting kit has two slide rail assemblies. A slide rail assembly
can be installed on either the right or left side of the rack.
Each slide rail assembly consists of a three-section slide rail and a removable
mounting bracket.
FIGURE:
Figure Legend
1
2
3
4
The front, middle, and rear sections form the slide rail. The middle and rear sections
■
have holes for mounting and adjust to fit rack depths from 24 in. (61 cm) to 36.5 in.
(93 cm). The front section can be extended to allow movement of the server out of
the rack.
72 SPARC Enterprise T5140 and T5240 Servers Installation Guide • July 2009
Sections of the Express Rail Slide Rail Assembly
Mounting bracket
Front section
Middle section
Rear section