Fujitsu SPARC Enterprise T5140 Installation Manual page 51

2. Attach the CMA rail extension to rear left slide rail.
At the rear of the rack, plug the CMA rail extension into the end of the left sliding
rail assembly. The tab at the front of the rail extension clicks into place. The right
sides of the two CMA arms have hinged extensions. On the manufacturer's
instruction sheet, the smaller extension is called the CMA Connector for Inner
Member. This extension attaches to the right mounting bracket. The larger
extension is called the CMA Connector for Outer Member, and attaches to the
right sliding rail.
Inserting the CMA Rail Extension Into the Rear of the Left Slide Rail (Either
FIGURE:
Server)
3. Insert the smaller extension into the clip located at the end of the mounting
bracket.
Slide the smaller extension into the square hole on the middle-in-width of the clip
that is located at the end of the mounting bracket.
Installing the SPARC Enterprise T5140 and T5240 Servers 29