Fujitsu SPARC Enterprise T5140 Installation Manual page 90
Hide thumbs
Also See for SPARC Enterprise T5140:
- Service manual (240 pages) ,
- Product notes (138 pages) ,
- Administration manual (76 pages)
Table of Contents
Advertisement
Identifying DOC Device Type(G3/G4/H3) ...
OK
Configuring network interfaces...Internet Systems Consortium DHCP
Client V3.0.1
Copyright 2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
Listening on LPF/eth0/00:14:4f:3f:8c:af
Sending on
Sending on
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
eth0: link up, 100 Mbps Full Duplex, auto-negotiation complete.
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
Hostname: hostname.
Starting portmap daemon: portmap.
Initializing random number generator...done.
INIT: Entering runlevel: 3
Starting system log daemon: syslogd and klogd.
Starting periodic command scheduler: cron.
Starting IPMI Stack...... Done.
Starting OpenBSD Secure Shell server: sshd.
Starting Servicetags listener: stlistener.
Starting FRU update program: frutool.
hostname login:
Related Information
"To Configure the Service Processor Network Management Port" on page 52
■
68
SPARC Enterprise T5140 and T5240 Servers Installation Guide • July 2009
LPF/eth0/00:14:4f:3f:8c:af
Socket/fallback
Advertisement
Table of Contents
