To Install The Slide Rail Assemblies - Fujitsu SPARC Enterprise T5140 Installation Manual

Note – The procedures in this chapter are the same for both the 1U and 2U servers.
The illustrations show a 2U server only as an example.
The rackmounting kit (same for both 1U and 2U servers) contains two slide rail
assemblies, which can be installed on either the right or left side of the rack. A slide
rail assembly consists of two parts, a slide rail and a removable mounting bracket.
The slide rail attaches to the rack posts. The mounting bracket attaches to the server
chassis.
Related Information
"Slide Rail Assembly Notes for Both Servers" on page 15
■
"To Install the Slide Rail Assemblies" on page 20
■

▼ To Install the Slide Rail Assemblies

1. Pull both mounting brackets completely out of their respective slide rails.
a. Simultaneously press and hold the upper and lower lock buttons of the slide
20 SPARC Enterprise T5140 and T5240 Servers Installation Guide • July 2009
rail lock.