Fujitsu SPARC Enterprise T5140 Installation Manual page 122

FIGURE:
Figure Legend
1
5. Open the cage clamp by inserting the cage clamp tool (or small screwdriver)
into the rectangular hole directly above the hole in the DC input plug where
you want to insert the first wire, and push in to open the cage clamp.
FIGURE:
6. Feed the exposed section of the appropriate wire into the round plug hole in the
DC input plug.
100 SPARC Enterprise T5140 and T5240 Servers Installation Guide • July 2009
Stripping the Insulation From the Wire
1/2 in. (13 mm)
Opening the Cage Clamp Using the Cage Clamp Tool