Table of Contents
Advertisement
Firmware and Hardware
Overview
The WAN Adapters Setup utility enables you to manage
hardware and firmware for 5536-DM RAS communication
controllers, and make configuration changes after completing
the software installation. Use this utility to add 5536-DM RAS
boards and their firmware to the operating system. Also use
this utility to remove 5536-DM RAS boards or to make other
changes to card and port properties. If you need to enable or
disable an MVIP Bus connection or change digital modem
COM port assignments, do so by editing card properties.
The chapter explains how to do the following tasks:
• Access online help
• Start the utility
• Manage firmware properties for the board
• Manage hardware properties for the board, including
• Load, save, and activate the WAN setup after changing
Accessing Online Help
For detailed information about the functions described in this
chapter, see the WAN Adapters Setup online help. You can
access online help in the following ways:
• Click Help to display the main online help.
• Press F1 to display contextual help in a pop-up window.
5536 PRI RAS Communications Controller Users Guide
5Setting Up WAN
card properties, ISDN port properties, and digital
modem port properties
any firmware, card, or port properties
5
71
Advertisement
Table of Contents
