Utilities - Interphase RAS Communications Controller 5536 User Manual

Software Overview
• The SecurID support driver submits, in coordination

Utilities

The software also includes the following utilities, which are
installed along with the base driver:
• The WAN Adapters Setup utility enables you to manage
• The Digital Modem Monitor utility enables you to
• The SynWatch utility enables you to track connections
• The LoopTest utility enables you to check the ISDN
• The Line Test utility enables you to set port modes (with
• The Line Status utility enables you to diagnose network
6
– RAS support driver for digital modem
communications
with the SecurID support service, the security
information to the ACE/Server through the local
ACE/Agent, and gives the authentication result back to
the RAS support driver, which will either carry on the
connection or abort it.
New PIN and Next Tokencode modes are not
supported.
the board's firmware and hardware properties.
monitor the board's digital modem connections.
and data traffic on ISDN channels.
line.
your Telco's agreement) if you need to do low-level
testing because of line trouble at installation.
connection problems.
Interphase Corporation