Configuring Isdn Port Properties - Interphase RAS Communications Controller 5536 User Manual

Setting Up Card and Port Properties
Figure 4-7. Card Properties Dialog Box
2. Select the MVIP Bus connected field (in the Bus
3. Click OK to save the connection and return to the WAN

Configuring ISDN Port Properties

ISDN port properties must always be configured for both
Digital Modem and ISDN RAS support drivers. Configure
ISDN port properties as follows:
1. In the Cards section of the WAN Adapters Setup dialog
46
The Card Properties dialog box appears:
section) by clicking on the checkbox.
Adapters Setup dialog box.
box, select the ISDN PRI port you want to configure
and click Properties.
The ISDN PRI Port Properties dialog box appears:
Interphase Corporation