Verifying Com Ports - Interphase RAS Communications Controller 5536 User Manual

Verifying COM Ports

You can use HyperTerminal, provided by Windows NT, to
verify your Serial COM ports for digital modems.
HyperTerminal enables you to ensure that COM ports have
been declared and are running properly. HyperTerminal
enables you to emulate various terminals, such as VT100,
TTY, and ANSI.
To verify your COM ports:
1. From the Windows NT Start menu, select Programs,
5536 PRI RAS Communications Controller Users Guide
up networking needs to be configured because the list of
installed modems has changed, and asks if you would
like to do this now.
Dial-up networking is a RAS function, which is not
used with the Serial driver COM ports associated with
the Interphase Digital Modem. To ignore the prompt
and finish the Serial driver digital modem installation,
click No.
(Responding Yes opens the Remote Access Setup
dialog box, which is used to configure digital modem
RAS ports. For information about configuring digital
modem RAS ports, see
Channels as RAS Ports on page
Accessories, and HyperTerminal.
The Connection description dialog box appears.
Chapter 7: Managing Serial Driver COM Ports
Setting Up or Removing
90.)
113