Software Overview; Drivers - Interphase RAS Communications Controller 5536 User Manual

Ras communications controller
Table of Contents

Advertisement

Software Overview

The software package supports up to four 5536-DM boards
installed in a system. It handles three types of ports:
• ISDN(x), for ISDN communications using RAS
• DM(x), for digital modem communications using RAS
• COM(x), for digital modem communications using
The software package includes drivers, utilities, and a RAS
management tool.

Drivers

The software package includes the following drivers:
• The Base driver for Windows NT is the basic driver
• The Serial driver manages COM port emulation on the
• The RAS support drivers support Microsoft Remote
5536 PRI RAS Communications Controller Users Guide
COM ports
required to support the board.
board. It supports digital modem communications by
enabling ISDN B channels to emulate COM ports. It is
installed with the base driver.
Access Service. They enable the transport of TCP/IP,
IPX/SPX, and NetBEUI protocols over ISDN and
digital modem lines.
The RAS support driver can also extract the security
information included in the packets exchanged at the
beginning of the communication, during the
authentication phase, and provide it to the SecurID
support driver. The PPP authentication protocols
supported for SecurID are PAP, CHAP, and MS-CHAP.
There are two types of RAS support drivers:
– RAS support driver for ISDN communications
Chapter 1: Introduction
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Entia 5536 dm pri

Table of Contents