Watching Isdn Pri Layer 1 Alarms - Interphase RAS Communications Controller 5536 User Manual

Watching ISDN PRI Layer 1 Alarms

The following illustration shows the menu of watch modes for
a B channel or a port:
Figure B-3. ISDN B Channel Watch Modes
For detailed information about each watch mode, see
SynWatch online help.
N
OTE
If the right mouse button on your mouse is not activated,
use the Watch menu to change watch settings.
Watching ISDN PRI Layer 1 Alarms
ISDN PRI Layer 1 alarms are managed by the board, and are
activated when physical events occur.
To display these alarms using SynWatch:
1. In the Configuration panel of the SynWatch dialog box,
2. From the Watch menu, select Layer 1 alarms.
144
right-click the PRI port for which to display alarms.
Interphase Corporation