Specifying The Number Of Frames To Send - Interphase RAS Communications Controller 5536 User Manual

To show or hide the LoopTest event list, on the LoopTest main
dialog box, select Display event list from the Test menu.
To save the event list to an ASCII (text) file, select Save or
Save as (to save a previously saved file with a different name)
from the Test menu.

Specifying the Number of Frames to Send

To specify the number of frames to send, do the following:
1. On the LoopTest main dialog box, select the
2. Enter the number of frames in the Iterations count
5536 PRI RAS Communications Controller Users Guide
Parameters option from the Test menu.
The Test Parameters dialog box appears:
Figure C-2. LoopTest Parameters
field. The higher the iterations count, the longer the test
duration.
(The sub-address is not used for 5536-DM testing.)
Appendix C: LoopTest Utility
157