Table of Contents
Advertisement
3. To set the speech coding law, select A Law for Europe
4. Click OK.
5. Repeat Steps
Saving WAN Setup Properties
Save any changes to WAN firmware, card, and port properties
as follows:
1. Apply the changes by clicking the Apply button.
2. Reload the firmware on the card by clicking the Load
3. After the properties have been loaded, click OK to save
4. To re-enable the RAS Server and RAS Port Manager
5536 PRI RAS Communications Controller Users Guide
Chapter 5: Setting Up WAN Firmware and Hardware
and Australia, or select
America and Japan.
1
other installed 5536-DM RAS boards.
button. Then follow the on-screen instructions.
the reloaded configuration and close the WAN Adapters
Setup dialog box.
The configuration software automatically finds the
relevant firmware for the board. It updates the registry
and dynamically updates the drivers.
utility, stop and restart the services as follows.
a. From the Start menu, select Settings, and then
Control Panel. Then double-click the Services icon
to display the Services dialog box.
b. Select Remote Access Server from the list of
services, and click Stop.
c. When a message informs you that the RAS Port
Manager will also be stopped, click OK.
µ
Law (Mu law) for North
through
4
for the digital modems of any
87
Advertisement
Table of Contents
