Modem Connection Leds; Completing The Mvip Bus Connection - Interphase RAS Communications Controller 5536 User Manual

Modem Connection LEDs

The 5536-DM RAS provides an LED for each modem
included on the board (for example, 12 LEDs for 12 modems).
These LEDs turn on when a modem has established a
connection on the MVIP Bus. They turn off when the modem
has interrupted the connection.

Completing the MVIP Bus Connection

To create a dedicated interconnection among MVIP boards,
connect a ribbon cable to the 40-pin, double-row, right-angled
headers on the top edges of the boards.
After you finish connecting the board to the MVIP Bus, finish
the remaining steps in the
5536 PRI RAS Communications Controller Users Guide
Chapter 2: Installing the Hardware
Installing the Board section.
25