5.15
User Authentication
User authentication is used to modify login user name and password:
User name – key in the new user name. The default is root.
Password - key in the new password. The default is root.
Confirm password - Retype the new password for confirmation.
Click Apply to save the configuration.
5.16
Port Menu
Port Statistics provides statistics for current port traffic. You can use the Clear button
to clean out off of the counts. The following information is provided in the Port
Statistics screen:
Port – displays the port number
Type – displays the media type of the port
Link – displays the link status (up or down)
State – Set the port as Enable or Disable via port control. When the state is
disabled, the port will not transmit or receive packets.
TX Good Packet – counts the good packets transmitting
TX Bad Packet – counts the bad packets transmitting (including undersize <64 bytes,
oversize, CRC align errors, fragments and jabber packets)
RX Good Packet – counts the good packets receved
TX Bad Packet – counts the bad packets received including undersize <64 bytes,
Waters Network Systems
5.15 – User Authentication
GSM2109-1009-8PoE User's Manual
Page 42