5.30
MAC Address Table
The MAC Address Table uses MAC addresses to ensure port security.
Static MAC Address
The Static MAC Address menu allows you to add a static MAC address. The static
MAC address will remain in the switch's address table, regardless of whether or not the
device is physically connected to the switch. This eliminates the need for the switch to
re-learn a device's MAC address when the disconnected or powered-off device once
again becomes active on the network. You can add/modify/delete a static MAC
address.
To add a static MAC address in switch MAC table, follow this procedure:
1. MAC Address - enter the MAC address of the port that should permanently
forward traffic, regardless of device activity.
2. Port No. – pull down the selection menu to select the port number.
3. Click Add to save the configuration.
Waters Network Systems
Figure 5.40 – 802.1x Miscellaneous Configuration
GSM2109-1009-8PoE User's Manual
Page 74