Snmpv3 Configuration - Waters Network Systems GSM2109-1009-8PoE Operating Manual

Click Add - to save the settings.
To remove the community string, select the community string to be removed and click
Remove. The default community string cannot be removed.
5.25.3

SNMPV3 Configuration

To configure the SNMP V3 function, the following tasks should be done. See Figure 5.33 –
SNMP V3 Configuration Interface.
Configure the Context Table.
Assign the context name of the context table.
Click Add.
Click Remove to remove an unwanted context name.
Configure User SNMP v3 User Table.
User ID – Enter a user name.
Authentication Password – Enter an authentication password.
Privacy Password – Enter a private password.
Click Add to add the password.
Click Remove to remove an unwanted password.
Waters Network Systems
Figure 5.33 – SNMP Trap Configuration
GSM2109-1009-8PoE User's Manual Page 62