Port Based Vlan Configuration - Waters Network Systems GSM2109-1009-8PoE Operating Manual

5.23.2

Port Based VLAN Configuration

When a port is configured in a VLAN, packets can travel only among members of the
same VLAN group. All unselected ports belong to another single VLAN. If the
port-based VLAN is enabled, VLAN-tagging is ignored.
In order for an end station to send packets to different VLANs, it has to be either capable
of sending tagged or attached to a VLAN-aware bridge that is capable of classifying and
tagging the packet with a different VLAN ID based on not only default PVID but also
other information about the packet, such as the protocol.
Figure 5.24 – VLAN Port Based Interface
1. Click Add to create a new VLAN group.
2. Enter the Group Name and VLAN ID.
3. Select the members of the VLAN group.
Click apply.
4.
Waters Network Systems GSM2109-1009-8PoE User's Manual Page 52