Web Based Management - Waters Network Systems GSM2109-1009-8PoE Operating Manual

4. The default user name is root, and the default password is root.
change the login identification to make it more secure for your network in the
System Configuration menu.
5. Once you have logged into the system, the following command prompt will be
displayed. Enter enable to access CLI commands.
Switch management can be accessed via the following methods:
• Console Connection described above. Begin entering CLI commands at this
prompt.
• Telnet – use the default IP of the switch 192.168.16.1 to access switch
management via Telnet.
• Web Interface described in Section 5.0.
Note: A complete list of CLI commands is included in Section 6.0.
5.0

Web Based Management

This section covers the functions of web based management. There is an embedded
HTML web site residing in flash memory in the CPU board of the switch. Web based
management provides advanced management features for the network administrator
that can be accessed from anywhere on the network through a standard web browser
such as Microsoft Internet Explorer (IE).
Waters Network Systems
Figure 4.9– CLI and Telnet Command Prompt
GSM2109-1009-8PoE User's Manual
You may
Page 25