Figure 100: White Balance Atw Mode Screen - FLIR CB-3102 User And Installation Manual

To configure color settings
1. In the Color section, configure the following settings:
Brightness ̶ Set the image brightness between -100 to 100, which provides
the highest brightness. The default is 0.
Contrast ̶ Set the image contrast between -100 to 100, which provides the
highest contrast. The default is 0.
Saturation ̶ Set the image saturation -100 to 100. The lower the number, the
closer the image is to a grayscale (i.e., monochrome or black-and-white)
image. The higher the number, the deeper the color image (i.e., reds will be
redder and blues will be bluer). The default is 0.
Hue ̶ Set the image hue between -100 to 100, which provides the deepest
hue. The default is 0.
To configure mirror flip settings
1. In the Mirror Flip Setting section, from the Orientation drop-down list, select one of the following:
Flip ̶ This setting flips the image upside-down.
Mirror ̶ This setting views the image from a different angle.
Both ̶ This setting views the image upside-down from a different angle.
OFF (default)
White Balance
The White Balance screen is used to create the best color rendition.
To set the White Balance mode
1. From the Mode drop-down list, select one of the following options:
ATW – In ATW mode, color is continuously adjusted according to the color
temperature of the scene illumination. This is the default setting.
Auto – In Automatic mode, the color in a scene is automatically adjusted
according to the ambient lighting between 2500°K to 10000°K.
July 21, 2016

Figure 100: White Balance ATW Mode Screen

Figure 101: White Balance Auto Mode Screen
Ariel CB-3102 User and Installation Guide
Accessing the CB-3102 via a Web Browser
85