Icom IC-F8100 Instruction Manual page 42

5
MENU SCREEN
D Admin Menu items
Tuner type
Select the connected Icom antenna tuner from AT-140
or AT230 antenna tuner or OFF.
TX Timeout
Set the Time-Out Timer function time to 1, 3, 5 or 10
minutes, or OFF. If a continuous transmission exceeds
the selected time period, transmitting will be cut off.
CW Break-In
The CW Break-In function toggles transmit and re-
ceive with your CW keying. This allows you to mute
receiving the time delay ends after you stop keying.
Turn ON the CW Break-In function and sets the delay
to 0.5, 1, 2 or 3 seconds, or OFF.
VFO Mode
Select the activation of the VFO mode ON or OFF.
AGC
Turn the Automatic gain control function ON or OFF.
Clear Talk Level
The Clear Talk function adjusts signals in the pres-
ence of noise by using the DSP circuit. This item
adjusts the Clear Talk Level from 1 (Minimum) to 15
(Maximum).
Meter Type
This item sets the transmit meter type to TX POWER
or MIC LEVEL.
39
(Default: OFF)
(Default: 3min)
(Default: 2.0sec)
(Default: ON)
(Default: ON)
(Default: 10)
(Default: TX POWER)