Agc Function - Icom IC-F8100 Instruction Manual

3
RECEIVE AND TRANSMIT
■ Functions for receive (Continued)
D AGC function
The AGC (auto gain control) controls receiver gain
to produce a constant audio output level even when
the received signal strength is varied by fading, and
so on.
The transceiver has two AGC characteristics (time
constant: FAST and SLOW) and AUTO.
[�]
D AGC OFF function
When receiving weak signals with adjacent strong
signals or noise, the AGC function may reduce the
sensitivity. In this situation, the AGC function should
be turned OFF.
[�]
17
/
[�]
/
q Hold down [MENU](HOME) for 1 second to enter
the Menu screen.
w Push [r] or [s] to select the "User Menu," and
then push [4].
e Push [r] or [s] to select "AGC."
r Push t or u
[ ](§) [ ](§§§)
time constant, FAST, SLOW or AUTO.
When AUTO is selected, the AGC time constant
varies, depending on the operating mode.
t Push [MENU](HOME) twice to return to the nor-
mal operating screen.
q Hold down [MENU](HOME) for 1 second to enter
the Menu screen.
w Push [r] or [s] to select the "Admin Menu," and
then push [4].
e Push [r] or [s] to select "AGC."
r Push t to turn OFF the AGC function.
[ ](§)
t Push [MENU](HOME) twice to return to the nor-
mal operating screen.
to select the desired AGC