Vfo Operation - Icom IC-F8100 Instruction Manual

2
BASIC OPERATION

■ VFO operation

In the VFO mode, you can set a desired operating fre-
quency, operating mode or split frequency function.
NOTE:
• The VFO mode operation can be inhibited in the
Admin Menu.
• While in the VFO mode, the Selcall, ALE features
or the Emergency key cannot be used.
• Entering the VFO mode
Push [VFO](2) to turn the VFO mode ON or OFF.
• Frequency setting
q Push [A/B](§) to select VFO A or VFO B.
w Push [4] to enter the frequency setting mode.
e Push [t](§) or [u](§§§) to move the cursor to se-
lect the desired digit.
• The cursor shows the selected digit.
r Push [r] or [s] to change the frequency.
t Push [4] to exit the frequency setting mode.
• Turn the split frequency function
q Push [A/B](§) to select VFO A or VFO B, then set
the receive frequency or transmit frequency.
w Push [Split](§§§) to turn the split frequency func-
tion ON.
• TX frequency appears below the RX frequency.
e To turn OFF the split frequency function, push
[Split](§§§) again.
11
/
[�] [��] [���]