15.
CERAMIC FUEL BED ASSEMBLY
15.1
Place the ceramic back wall in position centrally at
the back of the firebox. It must rest on the metal
ledge at the back of the firebox (see figure 23).
Fig. 23. Back wall position
15.2
Place the ceramic side walls in position at the sides
of the firebox. The sides are left and right handed.
The sides should locate in the sloping channels
near the bottom of the firebox sides and in the gap
between each side of the firebox and the black top
baffle (see figure 24).
Fig. 24 Side walls position
15.3
Place the rear log in the retaining cradle behind the
rear burner tube with its back against the back wall.
Center the log so that the gap to the side wall is the
Fig. 25 Rear log position
same at each side (see figure 25).
15.4
Place the centre log on the retaining cradles
between the rear and front burner tubes. Center the
log so that the gap to the side wall is the same at
each side (see figure 26).
Fig. 26 Centre log position
16