Ceramic Fuel Bed Installation - Valor Retrofire F24BN Installation And Owner's Manual

Install the Ceramic Brick Liner
Install the ceramic brick liner taking care not to damage them as the material is fragile. The top rounded edges of
the side panels should face inwards and the front edge is bevelled. Place the side brick panels flat up high against
the side of the firebox and slide them downward into place, behind the frame of the firebox.
Side Brick in front of Rear Brick
Left
Brick
Side Brick Behind
Firebox Return
Install the Ceramic Log Set
Carefully remove the ceramic logs from the packaging, taking care not to damage them. Install the logs as described
below. Log position is critical to the look of the fire and should be done carefully to avoid problems.
Drop Rear Log into place
behind front log retainers
Front Log locating pins

Ceramic Fuel Bed Installation

Rear Brick
Rear Brick
Rest Brick on
Rear Log Support
Left
Brick
Rear Log Touches
Front Log Here
Place Font Log onto locating
Pins at Each End
Rear Brick
Right
Brick
Right Log
Locating Pins
13