Safety Information - Valor Legend 936XN Installation And Owner's Manual

Freestanding direct vent gas fireplace heater
Table of Contents

Advertisement

Due to high temperatures, the appliance should be
located out of traffic and away from furniture and
draperies.
Children and adults should be alerted to the
hazards of high surface temperatures and should
stay away to avoid burns or clothing ignition.
Young children should be carefully supervised
when they are in the same room as the appliance.
Clothing or other flammable material should not
be placed on or near the appliance.
The glass and front frame must be put back in
place prior to operating the appliance if they have
been removed for servicing or cleaning.
Never operate with broken or damaged window
glass.
WARNING: Do not operate the appliance with
the glass front removed, cracked or broken.
Replacement of the glass should be done by a
licensed or qualified service person.
(The whole window unit may be temporarily
removed by the owner for cleaning the interior
of the firebox, etc).
Only the authorised Valor replacement
window unit listed in the repair parts booklet
must be fitted – never use substitutes.
If the glass is damaged search inside and
adjacent to the appliance for any glass
fragments.
This appliance should be installed and repaired by
a qualified service person.
The appliance should be inspected before use and
at least annually by a professional service person.
More frequent cleaning may be required due to
excessive lint from carpeting, bedding material,
etc. It is imperative that control compartments,
burners and circulating air passageways of the
appliance are kept clean.
When operating your new stove for the first time, some vapors may be released which may cause a slight odor and could
possibly set off any smoke detection alarms in the immediate vicinity. These vapors are quite normal on new appliances.
They are totally harmless and will disappear after a few hours use.
1.

SAFETY INFORMATION

OPTIONS
Keep
curtains,
flammable materials a safe distance from all parts
of the appliance and its vent system.
Keep the appliance area well clear and free from
combustible
materials,
flammable vapors and liquids.
Never attempt to burn paper or any other material
in the appliance.
Keep the base of the appliance clear to prevent
obstruction of air flow to the appliance. If fitted
with a pedestal base, make sure that the grill at
back is not obstructed. If fitted with legs, make
sure there is no obstruction between the legs.
INTERRUPTION OF GAS SUPPLY; If ever there is a
break in the flow of gas through the supply system
to the appliance (For example, for repair work in
the supply system either inside or outside your
property), we recommend that the window unit is
removed before lighting the pilot. This will allow
any air which has become trapped in the supply
piping to escape without building up in the firebox
before the pilot will light. Wait until the pilot flame
is stable before refitting the window but refit it
before turning the control to any position other
than pilot ignition. Details of how to remove the
window
are
given
installation section of this manual.
The vent terminal on the outside wall must be kept
free from obstructions. The terminal is hot during
operation and requires a guard (Part #235) if it is
accessible to any person. No objects should be
placed within 2 feet (60cm) of the vent terminal.
During extreme weather conditions ensure that the
vent outlet is free from ice and snow before
attempting to light.
Do not use this appliance if any part has been
under water. Immediately call a qualified service
technician to inspect the appliance and to replace
any part of the control system and any gas control
which has been under water.
NOTE
The following options are available for this appliance:
#710 CFK
Circulating fan kit (For pedestal base only).
3
clothing,
furniture
and
gasoline
and
in
the
preparation
other
other
for

Advertisement

Table of Contents
loading

This manual is also suitable for:

Legend 936xp

Table of Contents