Table of Contents
Advertisement
4 SYSTEM FUNCTIONS
3
Select the desired mailbox
type using the
button and press the
[ENTER] button.
[1. CONFIDENTIAL]:
If a data is retrieved from this box,
the data will be cleared.
[2. BULLETIN BOARD]:
Even if a data is retrieved from this
box, the data remains in the box.
[3. RELAY]/[4. MAILBOX SETUP]:
Not used in this operation.
4
Select "3. POLL FROM
MAILBOX" using the
[ENTER] button.
5
Enter the desired mailbox
number (up to 20 digits)
with the digital keys and
press the [ENTER] button.
If you make a mistake, press one of the following keys to correct the mistake. For
key locations of [BACKSPACE], [DELETE] and [INSERT], see the following page.
[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered.
[BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlighting the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of) an
existing character highlighted by the cursor. Press this key again to exit the Insert
mode.
6
Enter the password with
the digital keys, if the pass-
word has been set on the
confidential box, and press
the [ENTER] button.
126
Mailbox Communication
or
button and press the
P.29 "Keyboard"
MAILBOX
1.CONFIDENTIAL
2.BULLETIN BOARD
3.RELAY
CONFIDENTIAL
1.PRINT MAILBOX
2.TX TO MAILBOX
3.POLL FROM MAILBOX
CONFIDENTIAL
or
1.PRINT MAILBOX
2.TX TO MAILBOX
3.POLL FROM MAILBOX
POLL(CONFIDENTIAL)
MAILBOX NUMBER(MAX20):
POLL(CONFIDENTIAL)
MAILBOX NUMBER(MAX20):
Advertisement
Table of Contents
