Table of Contents
Advertisement
2
Place the original(s) and set the transmission conditions.
P.38 "When setting originals on the glass"
P.41 "When using the Automatic Document Feeder (optional) or Reversing Auto-
matic Document Feeder (optional)"
P.42 "Setting the Transmission Conditions"
3
Pick up the handset of the
external telephone.
4
Specify the remote Fax.
Keypad Dialing (Direct Entry with Digital Keys):
One Touch Key Dialing:
Abbreviated Dialing:
Alphabet Dialing:
Each press of a digital key dials a number. If you make a mistake when dialing the
remote Fax number, put the handset down to cut the line, and then pick up the handset
again to redial.
5
When you hear the answer tone (short high-pitched tone) through
the handset indicating the connection has been made with the
remote Fax, press the [START] button.
6
Select "1. TRANSMIT"
using the
or
and press the [ENTER] but-
ton.
The equipment automatically
starts scanning and sending the
document.
The screen on the right may
appear when the equipment has
failed to detect the original size.
In this case, re-place the origi-
nal, or select the original size
using the
or
press the [ENTER] button.
Dial tel number:
2006-04-10 13:23
RESOLUTION:STANDARD
P.48
P.50
P.51
COMMUNICATING SETTING
button
1.TRANSMIT
2.RECEIVE
COMMUNICATING
JOB NUMBER
23
Select original size
1.LT
2.LD
3.LT-R
button and
M: 100%
P.47
:15
Specifying the Remote Fax
59
Advertisement
Table of Contents
