Receiving A Fax; Reception Mode; Automatic Reception - Toshiba GD-1220 Operator's Manual

Receiving a Fax

Reception Mode

There are 2 reception modes:

Automatic Reception

Faxes are automatically received during the incoming calls.
- To change the Ring Delay (number of rings before the equipment answers the incoming
calls), see
The line is designated for use exclusively by the Fax.
Manual Reception
Set this mode when the Fax is connected to a line that is also used as a voice telephone line.
- When the bell rings, pick up the handset of the external telephone and talk with the other
party, and then press the [START] button to receive a Fax.
An external telephone is required (not available for the European version).
* When the polling TX document is reserved, automatic reception is performed even in the manual

reception mode.

Automatic Reception

Set this mode when the phone line is used exclusively for Faxing. The Fax automatically
receives incoming originals.
Confirm the reception mode on the Function List. (
Setting of the automatic reception mode
1
Press the [USER FUNC-
TIONS] button on the con-
trol panel and select "01.
DEFAULT SETTINGS"
using the
and then press the [ENTER]
button.
"DEFAULT SETTINGS" screen
appears.
P.61 "Setting of the automatic reception mode".
or button,
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
P.240 "Function list")

Receiving a Fax

61